ACMER review
Updated September 30, 2026 · GizmoCue Editorial Team · Facts checked September 30, 2026
We earn a commission when you sign up through links on this site. Partner status can affect where a brand appears in our rankings.
Our verdict
ACMER suits makers who want an engraver and a cutting machine from one brand, with machines priced from $129 and a work area of 400 mm. A 100 W fibre marking machine and warranty of 1 to 2 years cover the range most beginners start with.
Key facts
- Best for
- Makers who want an enclosed engraver and cutting machine from one US-based brand.
- Price from
- $129 (Source, checked September 30, 2026)
- Largest build size (mm)
- 400 (Source, checked September 30, 2026)
- Warranty
- 1 to 2 years (Source, checked September 30, 2026)
- Laser power (W)
- 100 (Source, checked September 30, 2026)
- Enclosed models
- Yes (Source, checked September 30, 2026)
- Markets
- AT, AU, BE, BG, BR, CA, CO, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HR, HU, IE, IT, LT, LU, LV, MT, MX, NL, NZ, PE, PL, PT, RO, SE, SI, SK, US (Source, checked September 30, 2026)
- Legal entity
- JYGHSDEVC LLC (Source, checked September 30, 2026)
- Headquarters
- United States (Source, checked September 30, 2026)
- Support channels
- Email, Phone, Help-centre, Community (Source, checked September 30, 2026)
- Products
- Laser engraver, Cutting machine
- Official website
- acmerlaser.com
Apps and profiles
- Elsewhere
- facebook.cominstagram.comyoutube.com
Pros and cons
Pros
- Entry price of $129 keeps an enclosed machine within reach for a first build.
- Sells laser engraver and cutting machine from one store, while Cricut lists cutting machine only.
- Warranty of 1 to 2 years, with the longer end above the 1.5 year upper quartile in this category.
- Support runs on email, phone and help centre, so help can be a written answer or a phone call.
Cons
- Warranty of 1 to 2 years falls short of the 3 year longest cover in this category.
- Entry price of $129 sits above AtomStack's €87.95, so a cheaper first machine exists elsewhere.
- A 400 mm work area is smaller than the 564.05 mm upper end of the category.
Ready to try ACMER?
Scored 9.4 / 10 by GizmoCue.
Who it suits
- Makers who want engraving and cutting from one place, since ACMER lists laser engraver and cutting machine.
- First-time buyers working on modest pieces, with a 400 mm work area and warranty of 1 to 2 years.
- People who prefer to talk to someone, since support runs on email, phone and help centre.
Who should look elsewhere
- Tight first budgets: AtomStack lists from €87.95, below ACMER's $129.
- Makers who also want filament or resin printing, or scanning: MatterHackers lists fdm printer, resin printer and 3d scanner.
- Buyers who only want a cutting machine and value a simple catalogue: Cricut lists cutting machine.
What it does well
The enclosed machines in the range give you a 400 mm work area, enough for a small board, a panel or a sheet of acrylic without shuffling the job around mid cut. There is also a 100 W fibre marking machine in the line, which suits marking metal and plastic rather than cutting. Warranty runs 1 to 2 years depending on the model, so check the term attached to the machine you are buying rather than assuming it covers the whole range.
Where it sits among rivals
On entry price, ACMER sits at 6 of the 27 brands ranked on price from, which places it near the cheaper end of the list rather than the middle. On build size, it ranks 11 of 23, so the work area is nearer the middle of the field than the largest beds on the market. Both readings favour you if your pieces are modest in size, and work against you if you need the biggest bed available.
Who runs it
ACMER is run by JYGHSDEVC LLC, which is based in the US. Support runs on email, phone and help centre, so a written answer in the help centre or community forum is the usual first stop, with email and phone available when a job is stuck mid run. The seller, the support team and the warranty terms all sit with the same company, which means one counterparty to deal with when something needs fixing.
How ACMER compares
- 9.4 vs 9.1
- 9.4 vs 8.6
9.4 vs 8.7
9.4 vs 8.8- 9.4 vs 8.6
- 9.4 vs 9.1
9.4 vs 8.8
9.4 vs 9.2- 9.4 vs 9.1
- 9.4 vs 8.9
- 9.4 vs 9.2
9.4 vs 9.0
9.4 vs 9.3- 9.4 vs 9.5
9.4 vs 9.5
9.4 vs 9.4- 9.4 vs 9.3
- 9.4 vs 9.1
9.4 vs 9.0- 9.4 vs 9.0
- 9.4 vs 8.9
9.4 vs 8.8
9.4 vs 8.6
9.4 vs 8.6
TESmart
UMEVO
Joom
Nubia
Logitech
Antigravity
Xistore BY
Snapmaker US
ESR EU
Snapmaker Shop
Minisforum EU
Uperfect Monitor
XPPen
Where ACMER is available
- Available
- Australia, Austria, Belgium, Brazil, Bulgaria, Canada, Colombia, Croatia, Czechia, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Mexico, Netherlands, New Zealand, Peru, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, United Kingdom, United States
Countries from the brand (Source, checked September 30, 2026)
Frequently asked questions
How much does an ACMER laser machine cost at entry?+
ACMER lists machines from $129, and that entry point sits at 6 of the 27 brands ranked on price from. The cheapest listing is the floor for the brand rather than a bundle, and it covers its laser engraver and cutting machine.
How big a piece can I cut or engrave on an ACMER machine?+
The listed work area is 400 mm, which suits a small board, a panel or a sheet of acrylic. Measure the largest piece you plan to bring before you order, because anything wider than the frame will not fit, whatever the power rating says.
Are ACMER machines enclosed and usable indoors?+
Yes, the ACMER range is enclosed, so the beam stays inside a cabinet rather than an open frame, which suits a spare room or a small workshop. Keep ventilation in mind, since an enclosure does not clear fumes or dust for you.
How long is the ACMER warranty?+
Warranty runs 1 to 2 years depending on the model, which is short of the 3 year longest cover in this category. Check the term attached to your machine, since the length changes by model.
Where does ACMER sell and ship?+
The shipping policy lists AT, AU and BE, and the company behind the store is registered in the US. That is a wide spread of destinations, though duties, plug types and courier times still vary by country, so check the shipping terms before ordering outside the US.
How do I get help from ACMER if a job goes wrong?+
Support runs on email, phone and help centre, which means a help centre and a community forum for written answers, plus email and phone when you need a person. Setup and material questions suit the written channels, while a stalled job or a fault suits a phone call. Quote your model.
Is ACMER cheaper than AtomStack?+
AtomStack lists from €87.95 against ACMER's $129, so ACMER is the dearer entry. What the difference brings is the enclosed format, the 400 mm work area and warranty of 1 to 2 years, which is a sound first machine if you can stretch to it.
Does ACMER make anything besides laser machines?+
The range covers laser engraver and cutting machine and nothing else in the workshop sense. MatterHackers lists fdm printer, resin printer and 3d scanner, adding filament and resin printing plus scanning, so a workshop that needs both kinds of machine gets more from that store.
Sources
- acmerlaser.com checked September 30, 2026
Backs: Support channels
“For Support: support@acmerlaser.com; Phone: +1 (213) 776-3659; Support Center; Join Our Community”
- acmerlaser.com/collections/acmer-laser-machine checked September 30, 2026
Backs: Enclosed models, Price from, Products
“ACMER P3 48W Diode Enclosed Laser Engraver; ACMER K1 Enclosed Portable Laser Engraver”
- acmerlaser.com/pages/about-acmer checked September 30, 2026
Backs: Headquarters, Legal entity
“Address: 2104 MIDDLETON DR NORTH LITTLE ROCK, AR 72116, NORTH LITTLE ROCK, Arkansas, 72116, United States of America”
- acmerlaser.com/pages/shipping-policy checked September 30, 2026
Backs: Markets
“Shipping from US warehouse: United States; Shipping from Canada warehouse: Canada; Shipping from Europe warehouse: Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland,...”
- acmerlaser.com/pages/warranty checked September 30, 2026
Backs: Warranty
“Machine 12 Months; Fiber & MOPA Series 24 months”
- acmerlaser.com/products/acmer-p3-48w-diode-enclosed-laser... checked September 30, 2026
Backs: Largest build size (mm)
“ACMER P3 48W Diode Enclosed Laser Engraver - working area size 400*400mm”
- acmerlaser.com/products/acmer-sm-30-100w-split-fiber-mopa... checked September 30, 2026
Backs: Laser power (W)
“ACMER SM Best Budget Fiber MOPA Split Laser Marking Machine - Laser Power 30W / 50W / 60W MOPA/ 100W MOPA”
Compiled from 7 source pages, checked September 30, 2026. We did not open an account.
What changed
- September 30, 2026: axisScores cost was 9.5, now 9.6