Creality review
Updated September 30, 2026 · GizmoCue Editorial Team · Facts checked September 30, 2026
We earn a commission when you sign up through links on this site. Partner status can affect where a brand appears in our rankings.
Our verdict
Creality 3D Technology suits makers who want printing, scanning and laser engraving from one store, with machines starting at $199. The range mixes FDM, resin, scanning and laser gear under one roof, and support runs on email, phone and help centre for setup and troubleshooting.
Key facts
- Best for
- One store for FDM, resin, scanning and laser work, with machines from $199.
- Price from
- $199 (Source, checked September 30, 2026)
- Largest build size (mm)
- 350 (Source, checked September 30, 2026)
- Multi-colour printing
- Yes (Source, checked September 30, 2026)
- Top print speed (mm/s)
- 600 (Source, checked September 30, 2026)
- Laser power (W)
- 60 (Source, checked September 30, 2026)
- Enclosed models
- Yes (Source, checked September 30, 2026)
- Markets
- US, MX, DE, FR, ES, GB, AU, CA, JP (Source, checked September 30, 2026)
- Legal entity
- Creality 3D Technology LLC (Source, checked September 30, 2026)
- Founded
- 2014 (Source, checked September 30, 2026)
- Support channels
- Email, Phone, Help-centre, Community (Source, checked September 30, 2026)
- Products
- Fdm printer, Resin printer, 3d scanner, Laser engraver
- Official website
- creality.com
Apps and profiles
- Elsewhere
- LinkedInXgithub.com
Pros and cons
Pros
- The catalogue spans fdm printer, resin printer and 3d scanner, so printing, scanning and laser work stay under one brand.
- Multi colour printing is available, and 89.5% of brands in the printer ranking offer it too.
- Support runs on email, phone and help centre, giving phone and a help centre alongside email.
- Builds of 350 mm match the median build size in the printer ranking, 350.
- The store sells across US, MX and DE, so the same range reaches buyers in several regions.
Cons
- Starting price ranks 11 of 27 brands, so cheaper entry points sit elsewhere.
- Build size ranks 13 of 23 on the same measure, which leaves the biggest machines to other brands.
- Support runs on email, phone and help centre with no live chat listed, so quick answers wait on email, phone or the community board.
- MatterHackers adds cutting machines to fdm printer, resin printer and 3d scanner, so jobs outside printing and laser need a second supplier.
Who it suits
- Makers who want FDM and resin printing, scanning and laser engraving from one supplier (fdm printer, resin printer and 3d scanner).
- Buyers who need multi colour printing inside an enclosed machine.
- Shoppers in the United States, MX and DE who want support by phone and a help centre.
Who should look elsewhere
- Sovol, whose catalogue is FDM printers only, for a buyer who wants no resin, scanning or laser range.
- Farnell, which lists FDM printers and scanners only, for someone buying a single machine type through a distributor.
- MatterHackers, which carries the same FDM, resin, scanning and laser mix plus cutting machines, for shops that need the wider machine mix.
What it does well
The headline number is the build volume of 350 mm, which suits everyday parts, cases and prototypes without moving to a floor-standing machine. Multi colour is supported, so a job can run more than one material in a single build instead of being split across separate runs. Print speed of 600 mm/s keeps short test pieces quick. The chassis is enclosed, which contains fumes and stray particles and lets the machine sit in a shared room. The laser side delivers 60 W, in the band usually used for engraving and light cutting on sheet materials.
Where it sits among rivals
Entry price ranks 11 of 27 brands, so Creality is competitive on cost without being the cheapest way in. Build size ranks 13 of 23 on the same comparison, which leaves the brand in the middle of the field on volume rather than at the top end. Read together, the picture is a range that starts accessible and stays mainstream on size: sensible for parts fitting a normal print volume, and a step up for anyone whose designs need the largest beds on the market.
Who runs it
The store belongs to Creality 3D Technology LLC, founded in 2014, so the manufacturer and the storefront sit under one named company. Support runs on email, phone and help centre: email, phone, a help centre and a community board. The help centre is where setup and troubleshooting material sits, while phone and community take the questions those pages leave open. For a purchase this size, a named operating entity on the published terms gives buyers something concrete to point at when an order, a delivery or a claim needs sorting.
How Creality compares
- 9.2 vs 9.1
- 9.2 vs 8.6
9.2 vs 8.7
9.2 vs 8.8- 9.2 vs 8.6
- 9.2 vs 9.1
9.2 vs 8.8
9.2 vs 9.2- 9.2 vs 9.1
- 9.2 vs 8.9
- 9.2 vs 9.2
9.2 vs 9.0
9.2 vs 9.3- 9.2 vs 9.5
9.2 vs 9.5
9.2 vs 9.4- 9.2 vs 9.3
- 9.2 vs 9.1
9.2 vs 9.0- 9.2 vs 9.0
- 9.2 vs 8.9
9.2 vs 8.8
9.2 vs 8.6
9.2 vs 8.6
TESmart
UMEVO
Joom
Nubia
Logitech
Antigravity
Xistore BY
Snapmaker US
ESR EU
Snapmaker Shop
Minisforum EU
Uperfect Monitor
XPPen
Where Creality is available
- Available
- Australia, Canada, France, Germany, Japan, Mexico, Spain, United Kingdom, United States
Countries from the brand (Source, checked September 30, 2026)
Frequently asked questions
How much does the cheapest machine cost?+
Entry is $199 in the store's printer collection. That is the starting figure for a first machine, and the range runs upward from there into resin, scanning and laser equipment. Buyers moving up usually pay for the extra capability, so budget against the specific machine rather than the entry figure.
Is there a subscription or renewal cost after buying?+
The store sells hardware outright. Its published terms set out orders and support, at email, phone and help centre, rather than a recurring membership, so there is no renewal price in the cost of ownership here. What you weigh is the purchase, starting at $199, plus any add-on machine later.
What can I buy in one place?+
The range covers fdm printer, resin printer and 3d scanner, which means a maker can buy a printer, a scanner and a laser engraver from the same store rather than sourcing a second supplier. The FDM side covers filament work, the resin side covers fine detail, and the laser side covers engraving and cutting on sheet material.
How big is the print volume?+
Build size is 350 mm on the multi colour machines, and the chassis is enclosed around it. That handles common desk-sized parts, cases and enclosures, and it sits close to the median build in the printer ranking, 350. Furniture-scale pieces still need a bigger bed.
Does it print in more than one colour?+
Multi colour is supported, and it is the common setup here rather than an add-on: 89.5% of brands ranked in printer comparisons offer it too. Print speed on these machines is 600 mm/s, so multi material work does not mean giving up speed on short parts.
What laser power do I get?+
The laser side puts out 60 W, which is the figure to match against the material and thickness you plan to work. An enclosed laser machine suits engraving and light cutting on sheet materials rather than heavy plate, so buyers needing deeper cuts on thicker stock should compare that figure with a machine built for it.
Which countries does the store serve?+
Orders are covered across US, MX and DE, which spans North America, Europe, Australia and Japan. Shipping terms and delivery expectations are set against that market list rather than offered everywhere, so check the terms for your own country before ordering a machine.
How do I get help if something goes wrong?+
Support runs on email, phone and help centre, so there is a help centre for setup and troubleshooting plus email, phone and a community board for anything the guides miss. Phone is the quicker route for a machine that will not start or a part that arrives wrong, while the community board fills in setup detail.
Who is behind the store?+
The storefront belongs to Creality 3D Technology LLC, founded in 2014. Manufacturer and seller share one named entity, so orders, deliveries and support all run through a company that identifies itself in its own terms. Buyers placing a business order can use the entity name on their paperwork.
Sources
- store.creality.com/collections/3d-printers checked September 30, 2026
Backs: Price from, Products
“Ender-3 V3 SE $199.00 Add To Cart”
- store.creality.com/pages/terms-conditions checked September 30, 2026
Backs: Legal entity, Markets, Support channels
“United States and Mexico store.creality.com (US), /mx; crealityfalcon.com (US) Creality 3D Technology LLC 5080 Robert J Mathews Pkwy B, El Dorado Hills, CA 95762, USA”
- creality.com/about checked September 30, 2026
Backs: Founded
“2014 ... Creality was founded by four founders.”
- creality.com/products/k2-series checked September 30, 2026
Backs: Largest build size (mm), Top print speed (mm/s), Multi-colour printing
“The K2 Plus expands this to a massive 350 x 350 x 350 mm”
- crealityfalcon.com checked September 30, 2026
Backs: Enclosed models, Laser power (W)
“Class 1 Safety Enclosure: Fully enclosed design filters laser light (no goggles needed)”
Compiled from 5 source pages, checked September 30, 2026. We did not open an account.
What changed
- September 30, 2026: axisScores cost was 9.1, now 9.2